This is how I did them....
  First I cutout my pattern with 1cm (3/8") seam allowance (SA) on each side, including the top so I could turn my edge under. |
  Topstitch the hem along the top edge of the pocket. |
The Ottobre instructions have you add velcro here. I didn't have any velco, so I will add snaps later. Because of this I interfaced the top hem.   Press fold on pocket piece as marked on pattern. These lines are marked on the pattern sheets in dashed lines. |
 Folding the fabric right side together, stitch bottom corners of pocket. |
 To give a defined look, edgestitch along pressed fold on pocket piece. |
 Turn and press seam allowances on edges of pocket to wrong side. |
 Place Pocket on pants front (for these pants you are to put it on the left front) and either secure with pins or I used Steam-a-Seam to hold the pocket in place while you sew around the edge. After securing, you will edge stitch around the pocket to secure it to the pant. |
 Topstitch pocket onto pants.  |
 Fold and press pleats at top corner of pocket. |
 With the pleats folded stitch the top corners down to secure to the pants |
 Finished Pocket |
